Malika's aventures dans la modélisation 3d

Oh very nice ones !

I like them very much.

So I started doodling a bit, and ended up doing a set of eight 50mm round bases!

https://cults3d.com/en/3d-model/game/50mm-round-bases-for-6mm-8mm-miniatures-tech-shanty-texture

Citation :

Designed for various scifi 6mm / 8mm scaled tabletop wargames, these bases are perfect for mounting vehicles or small mechs.

Not counting the many details, these bases are about 2.25mm thick.

This kit contains the following parts:
- 8x 50mm diameter round bases
- 10x little detail bits to add on your bases

Please do not share or sell these files (including prints and remixes) without my written permission.

Another day, another release!

Alpha Hab Block One:

https://cults3d.com/en/3d-model/game/alpha-hab-block-one

Citation :

The Alpha Hab Block One is designed for 6mm/8mm gaming, but it could probably be upscaled for 10mm and 15mm scaled gaming as well. This makes the Alpha Hab Tower suitable for games such as Adeptus Titanicus, Dropzone Commander, or Battletech.

The kit contains both single piece as two piece (separate roof) versions of the building.
- 4 single piece Alpha Hab Block One (which each of the 4 roof types)
- 4 separate roofs
- walls put together as a single piece

The dimensions of the buildings are 62.4mm deep and 66.8mm wide. The heights vary (depending on the roof type), but the "walkable" part of the roof is 67.6mm tall.

Note that the final picture with the infantry base only shows how 25mm round based infantry look on and next to the building. Infantry and bases are not included in this kit.

Please do no share or sell these files (including prints and remixes) without my written permission.

Another Alpha Hab Block building? That's right!

ALPHA HAB BLOCK TWO!

https://cults3d.com/en/3d-model/game/alpha-hab-block-two

Citation :

The Alpha Hab Block Two is designed for 6mm/8mm gaming, but it could probably be upscaled for 10mm and 15mm scaled gaming as well. This makes the Alpha Hab Block suitable for games such as Adeptus Titanicus, Dropzone Commander, or Battletech.

The kit contains both single piece as two piece (separate roof) versions of the building.
- 3 single piece Alpha Hab Block Two (which each of the 3 roof types)
- 3 separate roofs
- walls put together as a single piece

The dimensions of the buildings are 77.64mm deep and 65.67mm wide. The heights vary (depending on the roof type), but the "walkable" part of the roof is 83.12mm tall.

Note that the final picture with the infantry base only shows how 25mm round based infantry look on and next to the building. Infantry and bases are not included in this kit.

Please do no share or sell these files (including prints and remixes) without my written permission.

Another day, and some new (modular) buildings are out! You can basically stack them up as short or tall as you want, depending on how many level components you wanna print out and cram in there.

Alpha Hab Block Three:
https://cults3d.com/en/3d-model/game/alpha-hab-block-three-modular

Citation :

The Alpha Hab Blocks are designed for 6mm / 8mm gaming, think of games such as Battletech, Adeptus Titanicus, or Epic.

It consists of the following parts:
- 1 entrance component
- 1 level component
- 3 roof components

Delta Hab Block One:
https://cults3d.com/en/3d-model/game/delta-hab-block-one-modular

Citation :

The Delta Hab Blocks are designed for 6mm / 8mm gaming, think of games such as Battletech, Adeptus Titanicus, or Epic.

It consists of the following parts:
- 1 entrance component
- 1 level component
- 1 roof component

Delta Hab Block Two:
https://cults3d.com/en/3d-model/game/delta-hab-block-two-modular

Citation :

The Delta Hab Blocks are designed for 6mm / 8mm gaming, think of games such as Battletech, Adeptus Titanicus, or Epic.

It consists of the following parts:
- 1 entrance component
- 1 level component
- 1 roof component

Beta Hab Tower:
https://cults3d.com/en/3d-model/game/beta-hab-tower-modular

Citation :

The Beta Hab Tower is designed for 6mm / 8mm gaming, think of games such as Battletech, Adeptus Titanicus, or Epic.

It consists of the following parts:
- 1 entrance component
- 1 level (single) component
- 1 level (triple) component
- 1 roof component

Ça commence à faire un sacrée collection de jolis bâtiment tout cela !

J'aime beaucoup le Delta block One ! Bravo !

So I've designed these a while back, they were originally meant for Vanguard Miniatures but got rejected. So I've decided to release them myself. STL's here: https://cults3d.com/en/3d-model/game/smallscale-weapon-morphing-infantry

Finally finished this one, and just had to release it!

The 804-R class tracked transport, also known as the 'Boar', can now be downloaded from my Cults3d.
STL's here: https://cults3d.com/en/3d-model/game/boar-class-tracked-transport

Belle bête !

I know I should spend more time on my own Void Barons setting, or my The Fringe inspired stuff, yet here I am getting distracted doing Adeptus Titanicus compatible parts. This time it's a Cerastus Knight compatible Gravity Gun.

https://cults3d.com/en/3d-model/game/gravity-guns-compatible-with-the-at18-cerastus-knight

Un concept très sympa.

Just released these ones on Cults3d, thought you might appreciate some rubble!

STL's here: https://cults3d.com/en/3d-model/game/smallscale-piles-of-rubble

Plein de petits accessoires pour décorer les dioramas et les tables de jeu, youpee !

So I did a thing...

https://cults3d.com/en/3d-model/game/hog-class-tracked-transport

Another day, another vehicle!

https://cults3d.com/en/3d-model/game/goat-class-tracked-transport

Really nice job, I like the last vehicle and it "bulky" style.

Did some more Cerastus Knight compatible weapons. This time: Volkite and Plasma!




STL's here: https://cults3d.com/en/design-collections/BitsBlitzDesigns/adeptus-titanicus-compatible