[Vanguard miniatures] Nouveautés

marell le fou a écrit:

Oooooh j'aime bien !

Oui, je trouve que c'est sympa de changer de bestiaire pour représenter un titan léger ayant un rôle différent du Warhound sur le terrain.

Citation :

Très tzeentchien.

Pas tant je trouve, on voit bien que c'est une tête façonnée et pas un déformation du Warp. Mais ce sera en effet facile à détourner pour représenter un titan dédié à Tzeentch.

Je pense en prendre un, je le préfère au Dire Wolfe

Effectivement, il est plus sympa que l'original. La taille, c'est du AT ou du Epic de tradition ?

Patatovitch a écrit:

Effectivement, il est plus sympa que l'original. La taille, c'est du AT ou du Epic de tradition ?

Les premiers titans chez Vanguard Miniatures avaient la taille Forumware mais celui-ci est compatible AT selon les dires du patron. Je pense qu'à ce niveau là c'est AT qui est devenu la référence, y compris pour les titans Eloi et Skinner.

Je l'aime bien aussi, je pense m'en offrir un, et en profiter pour commander d'autres petits merveilles de chez Vanguard.

Citation :

Les premiers titans chez Vanguard Miniatures avaient la taille Forumware mais celui-ci est compatible AT selon les dires du patron. Je pense qu'à ce niveau là c'est AT qui est devenu la référence, y compris pour les titans Eloi et Skinner

Sur leur Discord, ils ont dit que ca devrait être la même taille que le Dire Wolves, mais sans avoir la fig pour comparer en main

Alvaten a écrit:

Citation :

Les premiers titans chez Vanguard Miniatures avaient la taille Forumware mais celui-ci est compatible AT selon les dires du patron. Je pense qu'à ce niveau là c'est AT qui est devenu la référence, y compris pour les titans Eloi et Skinner

Sur leur Discord, ils ont dit que ca devrait être la même taille que le Dire Wolves, mais sans avoir la fig pour comparer en main

Il me semble qu'ils avaient publié des photos du premier prototype et que cela faisait au moins la taille du Warhound. Je crois que le Dire Wolf est un peu plus grand mais franchement cela devrait le faire à moins d'être intégriste.

Their Jackal (Warhound proxy) and Vulture (Dire Wolf proxy) are about the same size, both are a bit beefier than the Warhound.

Merci pour la précision !

Nouveau KS en vue pour Troublemaker Games ! On attends les détails avec impatience !

Le KS est en cours !

https://www.kickstarter.com/projects/troublemakergames/smallscale-plastic-terrain-kits-iv-stl-packs

J'aime beaucoup l'idée des plinthes/tuiles pour y poser les bâtiments. Ca ajoute un peu de cachet aux décors. J'en suis !

NooSphere464 a écrit:

J'aime beaucoup l'idée des plinthes/tuiles pour y poser les bâtiments. Ca ajoute un peu de cachet aux décors. J'en suis !

Oui, je suis d'accord, c'est le petit détail qui apporte de la "crédibilité" à un groupe de bâtiments.

New releases!

Novan Regulars – Warrior II Dozer Blades Set

Citation :

Set contains:

4 x dozer blades
4 x spiked rams

Note:

1. Designed to fit warrior II vehicle hulls

https://vanguardminiatures.co.uk/shop/novan-regulars-warrior-ii-dozer-blades-set/



Renegade – Dragon II Flamethrower Tanks

Citation :

Set contains:

3 x renegade dragon II hulls
6 x turrets (2 variants)
6 x fuel tanks (2 variants)
3 x hull MG’s

Notes:

1. You can build three of either variant vehicles
2. Image shows both variant designs
3. Warrior II spiked ram not included

https://vanguardminiatures.co.uk/shop/renegade-dragon-ii-flamethrower-tanks/




Renegade – Self-propelled Artillery Set

Citation :

Set contains:

3 x renegade SP artillery hulls
3 x short bow cannons
3 x heavy mortars
3 x hull MG’s

Notes:

1. This set contains the parts to build 3 cannon or 3 heavy mortar vehicles
2. Image shows one of each variant
3. The renegade militia artillery crew set contains plinthless figures that can be used on these vehicles

https://vanguardminiatures.co.uk/shop/renegade-self-propelled-artillery-set/




Renegade – Self-propelled Field Mortars Set

Citation :

Set contains:

3 x renegade SP artillery hulls
3 x heavy field mortars
3 x heavy quad launchers
3 x hull MG’s

Note:

1. This set contains the parts to build 3 mortar or 3 quad launcher vehicles
2. Image shows one of each variant
3. The renegade militia artillery crew set contains plinthless figures that can be used with these vehicles

https://vanguardminiatures.co.uk/shop/renegade-self-propelled-field-mortars-set/



Edit LTL : Je me suis permis d'ajouter les photos...

This also happened by the way...

Cybershadow Technocracy Heavy Recon Stalker- Jackal II

Citation :

**Cybershadow Technocracy Jackal II -** The Jackal II represents a generational leap in Cybershadow walker design heretofore unseen in Novan space. Though bearing the name of its predecessor, the Jackal II is a completely new chassis and has been rebuilt by the Technocracy from the ground up around a newer, more advanced power system.

Although the Jackal II is considered a light recon stalker, it still towers above even super-heavy tanks and other war engines common to Novan space. Each Jackal has two primary weapon hardpoints in the arms capable of mounting a wide variety of weaponry, ensuring commanders have the tools to engage any threat they should encounter. Complementing its primary weaponry are two modular hardpoints above the powercore coolant housings. These offer additional utility and flexibility by adding supplemental comms, optics, sensors, and countermeasures to the already robust systems of the standard Jackal II.

Tactically, Cybershadow Jackals can be found ranging far ahead of heavier walker battle squadrons, providing vital intel and conducting probing attacks ahead of the main assault. They are extremely agile for their size and can cover ground at phenomenal speed when necessary. Although lightly armed in comparison to the heavier battleline walkers, a single Jackal still possesses enough firepower to easily decimate lesser enemy formations. Indeed, Jackals have even been known to form the spearhead of smaller assaults should field commanders be unable to acquire heavier assets.

Notes:
1. PDF model assembly guide can be found in the Rules Category on this site.
2. Model shown mounted on an 80mm round spinner base from Troublemaker Games not included but available in store.
3. Full multi-part resin cast kit with metal cast crew figures included.
4. Approximate height of model dependent on pose, 68mms to 75mms.
5. Model painted by John Fielding.

https://vanguardminiatures.co.uk/shop/cybershadow-technocracy-heavy-recon-stalker-jackal-ii/


Cybershadow Technocracy Heavy Recon Stalker – Vulture

Citation :

**Cybershadow Technocracy Vulture -** The Vulture is a variant of the Jackal II recon chassis adapted to carry a larger ordnance piece than can usually be mounted on these “light” walkers. To accommodate the Vulture’s heavy dorsal weapon and weapon mount as well as its accompanying power systems, the engineering crew space within the torso has been replaced with a hardwired AI tasked with monitoring the Vulture’s power core and internal systems—oversight, usually provided by the onboard engineering drone on the Jackal II. To further offset the substantially increased weight of the dorsal cannon and systems but retain the speed necessary to achieve its fast-paced mission requirements, the Vulture also replaces the Jackal’s standard heavy weapons and arm mountings in favour of a pair of lighter defensive rotary cannon. Additionally, the notably lighter armour fitted to the lower legs of the Vulture is yet another visible example of the concessions to weight savings of the variant. In a long range, hull down fire support position, Vulture crews are able to mitigate the risk to their weaker legs through careful positioning.

The Vulture’s battlefield role is to provide integrated, long-ranged fire support to recon battle groups as well as serving in an overwatch/sniper capacity as required. Even within heavier Stalker cohorts, the Vulture is prized for its ability to quickly relocate, thereby opening opportunities for commanders to use the Vulture’s heavy dorsal weaponry for enfilading fire missions that would be impossible for a heavier chassis to fulfil.

Notes:
1. PDF model assembly guide can be found in the Rules Category on this site.
2. Model shown mounted on an 80mm round spinner base from Troublemaker Games, not included but available in store.
3. Full multi-part resin cast kit with metal cast crew figures included.
4. Model height approximately 68mms to 75mms dependent on pose, not including dorsal cannon.
5. Model painted by John Fielding.

https://vanguardminiatures.co.uk/shop/cybershadow-technocracy-heavy-recon-stalker-vulture/

Superbes titans ! Une vraie alternative aux figurines officielles Adeptus Titanicus !

Avec des petits détails intéressants comme le système de défense anti-aérien sur le Jackal II.

Je pense que l’année prochaine je vais investir dans un Jakhal II et un Vulture. J’aime beaucoup leur style !

New naval assets out!

Zeus pattern Grand Cruiser

Citation :

Novan fleet – combat vessel

Fully resin cast model

Set contains:

1 x grand cruiser hull
1 x grand cruiser prow
1 x grand crusher wings sprue
1 x grand cruiser bridge spr
2 x Zeus cruiser broadsides sprues
2 x grand cruiser dorsal broadsides sprues
2 x ball turret sprues

Notes:

1. The broadsides battery recesses are tight to either side requiring some trimming of the batteries to fit, it was to late in production to have this issue corrected but I did want to flag it up for potential customers to be aware of. The dorsal batteries fit fine.

2. Flight stand not included.

https://vanguardminiatures.co.uk/shop/novan-fleet-zeus-pattern-grand-cruiser/

Zeus GC – Dorsal Broadside Batteries

Citation :

Novan fleet – Zeus GC batteries

Set contains:

1 x Zeus grand cruiser dorsal batteries sprues
1 x Ball turrets sprue

https://vanguardminiatures.co.uk/shop/novan-fleet-zeus-gc-dorsal-broadside-batteries/

Cybershadows Assault Destroyers

Citation :

Cybershadow fleet – combat vessels

Set contains:

3 x resin cast destroyer hulls
3 x resin cast destroyer parts sprues
3 x dorsal turrets

Note:

1. Flight stands not included

https://vanguardminiatures.co.uk/shop/cybershadow-fleet-assault-destroyers/

Cybershadows Light Oilers

Citation :

Cybershadow fleet support – bulk liquid transport ships

Set contains:
3 x Resin cast Oilers

Notes:
1. These are the same ships that were previously available as metal casts
2. Flight bases not included

https://vanguardminiatures.co.uk/shop/cybershadow-fleet-light-oilers/

J'aime beaucoup cette gamme de vaisseaux spatiaux !